|
Function |
Description |
| Operation Feature |
Safety Operation Function |
The elevator suddenly stops at non-open-door area due to abnormal status, it would move at the low speed to the nearest floor to park and open the door. |
Automatic Floor Level Rescue
|
If the elevator is out of the power or order and not able to stop at the floor level, after the factor is solved, the control system would automatically sense the safety circuit, move to the nearest floor at the low speed, and open the door to rescue the passengers. |
Registered Call Cancelled while Reversing |
At the moment that the elevator changes the heading direction, the system would cancel the registered floors to avoid from invalid moving and to save the power consumption. |
|
|
If the passengers intentionally push most car call buttons, the system would inspect this abnormal status and cancel the calls to prevent from useless operation. |
Button Pressed Confirmation
Feedback
|
While the call buttons are confirmed to be pressed, there would be beep sound feedback to inform the passenger. If the door open button is pressed continuously, the beep sound would last constantly. |
|
|
If the signal of stop operation is triggered, the elevator would return to the base floor, open the door, and then shut down the power. |
Registered Call Cancelling
Function
|
The passengers could press the call button twice to cancel the registered call to prevent from useless parking. |
|
To provide VIP the special service mode, the elevator only accept the car call signals, not the hall calls. |
Full-Load Bypass Function
|
While the elevator is full loaded, it would bypass the signals of hall call and execute only car call command. Also the car/hall display would indicate "Full Load" to notice the waiting passengers. |
|
It could set the restricted floors to stop the service of specific floor levels. |
Secondary Operation Panel
(Optional) |
The support of the secondary operation panel could provide the operation convenience while in larger cab or crowd. |
Auto Error Record
|
If the error happens to the lift, such as safety circuit breaking or power failure, the system would record the error time and event. |
